What the Wave 2-in-1 pump is designed to do
The Wave 2-in-1 Double Manual Wearable Breast Pump is a hands-free, manual pump that needs no charging. You operate it with an ergonomic handle, and it includes a soft 24 mm silicone flange for fit and milk flow. It also connects to traditional breast pumps, so you can use it as part of a flexible pumping setup.
Because it is manual, your hand controls the pumping rhythm rather than a motor or app. That makes setup and positioning the main things to get right before you start.
Set up the pump before your first session
The supplied information confirms the pump's handle, hands-free design, 24 mm silicone flange, and traditional-pump connection, but it does not include a step-by-step assembly diagram or cleaning instructions. Use the steps below as a practical setup sequence, and follow any manufacturer instructions that came with your pump for cleaning and sanitizing.
- Check the flange: Confirm the soft 24 mm silicone flange is the size you intend to use. The 24 mm size is the one included with this pump; if you normally use a different size, check whether an alternative is available before your first session.
- Inspect the parts: Look over the flange and handle for cracks, tears, or residue before use. The supplied information does not list replacement schedules, so replace damaged parts according to the manufacturer's guidance.
- Decide how you will pump: You can use the Wave as a standalone manual wearable pump, or connect it to a traditional breast pump for flexible pumping options. Choose your setup before positioning the cups.
- Clean according to instructions: The supplied record does not include cleaning steps, so follow the cleaning and sanitizing instructions that came with your pump and any guidance from your healthcare provider.
Position the cups for hands-free use
The Wave is designed for hands-free use, which means the cups need to stay in place without you holding them. A supportive bra is the usual way to keep wearable cups stable, but the supplied information does not specify a particular bra type or fit. Choose a bra that holds the cups securely against your breasts without compressing them.
Center the 24 mm silicone flange over your nipple, then let the cup sit close to your body. The soft silicone flange is intended to support a smooth fit and milk flow, so avoid pulling or twisting it during positioning. Once both cups are in place, check that they feel secure before you start pumping.
Operate the manual handle
The Wave uses an ergonomic handle instead of a motor. The supplied information does not specify a recommended pumping rhythm, session length, or suction setting, so start gently and adjust to what feels comfortable for you.
- Start with a slow, gentle squeeze: Begin with light pressure on the handle and observe how the pump responds. Manual pumping lets you control the pace, so there is no need to rush.
- Find a comfortable rhythm: Continue at a pace that feels sustainable for you. If you feel discomfort, release the handle and reposition the flange before continuing.
- Pause and check the seal: If milk flow slows or the flange feels loose, stop and reseat the cup. A secure fit matters more than squeezing harder.
- Stop when you are ready: The supplied information does not give a target session length or milk volume. Follow your own comfort and any guidance from your healthcare provider.
Wave 2-in-1 features that affect how you use it
- Wave 2-in-1 Double Manual Wearable Breast Pump + Cups: This 2-in-1 double manual wearable breast pump offers an ergonomic handle and hands-free use, with no charging required. You control the pumping rhythm by hand and do not need to plan around charging or find an outlet.

Wave 2-in-1 Double Manual Wearable Breast Pump + Cups - Wave 2-in-1 Double Manual Wearable Breast Pump + Cups: It connects to traditional breast pumps for flexible pumping options and includes a soft 24 mm silicone flange for a smooth fit and optimal milk flow. You can use the Wave on its own or as part of a setup with a traditional pump, and the included 24 mm flange is the starting point for fit.
Double pumping tips for the Wave
Double pumping means using both cups at the same time. The Wave is a double manual pump, so both sides are part of the design. The supplied information does not describe a specific double-pumping technique, so the tips below focus on what the product facts support.
- Set up both sides before you start: Position both cups and check that each 24 mm silicone flange is centered and secure. This reduces the need to adjust mid-session.
- Keep the handles within easy reach: Because the pump is manual, you will be squeezing the handle. Arrange your setup so you can reach the handle comfortably without pulling the cups out of place.
- Use the traditional-pump connection when it helps: If you want to combine the Wave with a traditional breast pump, connect it as intended for your setup. The supplied information confirms the connection option but does not list compatible pump models, so check your traditional pump's instructions.
- Watch for fit changes during the session: Silicone flanges can shift as you move. If suction feels weaker or uncomfortable, pause and reseat the flange.
What to do when the pump does not feel right
If the pump feels uncomfortable, stop and check the flange position first. The 24 mm silicone flange needs to sit centered, and a twisted or folded edge can affect comfort and milk flow. If the flange looks damaged, replace it according to the manufacturer's guidance.
If you are unsure whether the 24 mm size is right for you, the supplied information does not include a sizing method or alternative sizes. Speak with a lactation consultant or your healthcare provider for fit guidance. The supplied record also does not cover cleaning procedures, storage, or milk-handling recommendations, so rely on the instructions included with your pump and your provider's advice.


